1. The need for construction site dust management
1. Background: The management of dust from construction sites is currently a key issue in the field of environmental protection and urban construction. With the acceleration of urbanization, construction sites, as an important part of urban development, produce dust problems that have an increasingly serious impact on the environment and people's health. Therefore, adopting effective dust control measures is an important task for realizing environmental protection and sustainable development.
1. Pain point: On construction sites, a large amount of dust is generated due to activities such as excavation, transportation and construction. These dusts not only pollute the environment, but also may affect the health of the neighboring residents. Therefore, effective dust control on construction sites is very necessary.
2. Solution: Using DJI FC30 tethered drone to continuously spray water for dust control is a modern method. DJI FC30 tethered drone can hover over the construction site, and through the water spraying equipment it carries, it can spray water in a large range and with a large flow rate on the place where the dust is generated, and then line into a large area of water mist, which can effectively reduce the generation of dust.
2. FC30 tethered drone dust spraying system
| Spraying and dusting systems | Nozzle type | direct fan spray |
| Maximum pressure with tube | Outlet side 235bar/23.5MPa | |
| Cleaning flow rate | max.900L/hour | |
| Barrier Avoidance | Millimeter-wave radar forward obstacle avoidance | |
| numerical range (e.g. padlock) | 0.2m to 5m can be customized |
3. Spraying dust removal process
1. Determine the dust areas that need to be treated: utilize the drone to take aerial photographs, and at the same time determine the dust areas that need to be treated according to the actual situation of the construction site. Then, according to the location and size of the dust area, set the flight altitude of the drone.
2. Load the water gun under the drone: Start the drone and make it fly according to the set route and altitude. When the drone flies to the dusty area, it starts spraying water.
3. Monitor the effect of dust control: Through the camera and PM2.5 sensor carried by the drone, the effect of dust control can be monitored in real time.
4. Adjusting the treatment strategy: according to the actual situation, the drone can take off again and use optical or infrared lenses to evaluate the treatment effect. If it is found that the dust control effect is not satisfactory, the flight route of the drone or water spraying strategy can be adjusted in time.
4. Business contacts
--DRONE SOLUTION PROVIDER--
MYUAV TECHNOLOGIES CO.,LTD.
Tax No.:91320118MA275YW43M LegalRegister No.:320125000443821
Add:No.89，Pingliang Street，Jianye District, Nanjing,China 210019
M:MYUAV@MYUAV.com.cn T:+86 25 6952 1609 W:en.MYUAV.com.cn
[Caution]MYUAV is a manufacturer of defense products and is under security management by a state agency.